HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 71
Power button board, Remove the power button board
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Power button board Description Power button board with cable Spare part number 598451-001 Before removing the power button board, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 41). 5. If your device has WWAN capability, remove the SIM (see SIM on page 42). 6. Remove the following components: a. Keyboard (see Keyboard on page 45) b. Hard drive (see Mass storage devices on page 48) c. Top cover (see Top cover on page 55) Remove the power button board: 1. Disconnect the power button board cable (1). 2. Remove the 3 Phillips PM2.0×2.0×7.0 broad head screws (2) that secure the power button board to the base enclosure. 3. Remove the power button board (3). Reverse this procedure to install the power button board. Component replacement procedures 63