HP Model 715/100XC hp 9000 series 700 model 715 workstations service handbook - Page 83
HPMC Caused by a Data Cache Parity Error
View all HP Model 715/100XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
HPMC Caused by a Data Cache Parity Error An HPMC interruption is forced when a data parity error is detected during a Load instruction to the memory address space or during a data cache flush operation. Table 4-9 shows an example of the HPMC error information retrieved from Stable Storage by the PIM_INFO command during the Boot Administration environment. Table 4-9. Processor Module Error (Data Cache Parity) Word Check Type CPU State Cache Check TLB Check Bus Check Assists Check Assists State System Responder Address System Requester Address System Controller Status Value 0x80000000 0x9e000004 0x40000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000nnn The value in the CPU State word indicates that register values and addresses stored in Stable Storage at the time of the HPMC were saved. The value on the Cache Check word identifies that logic in the processor module detected a (data) cache parity error. Ignore the value in the System Controller Status word. For Model 715/75, replace the PCX-T module. For any other Model 715, replace the Motherboard. Troubleshooting 4-29