HP Model 748 Model A4268A FWD SCSI Adapter InstallationandService Guide - Page 3

Contents, Preface, Preparing for the Installation, Installing the FWD SCSI Adapter

Get HP Model 748 - VME Workstation PDF manuals and user guides View all HP Model 748 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Contents Preface Chapter 1 Preparing for the Installation Product Description 1-2 Features 1-2 Physical and Environmental Specifications 1-2 Check That You Have the Necessary Equipment 1-3 System Prerequisites 1-4 Hardware Prerequisites 1-4 Firmware Prerequisites 1-4 Software Prerequisites 1-4 Record Adapter Information 1-5 Check the Switch Settings 1-6 Chapter 2 Installing the FWD SCSI Adapter Remove SBC from the Card Cage 2-2 Remove blank plate from front panel 2-4 For Model 743 only, install new Boot ROM if required 2-5 Install FWD SCSI Adapter card 2-6 Replace the SBC in the Card Cage 2-8 Connect the disk drives 2-9 Verify the operation of the FWD SCSI adapter 2-10 iii

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
iii
Contents
Preface
Chapter 1
Preparing for the Installation
Product Description
1–2
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features
1–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Physical and Environmental Specifications
1–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check That You Have the Necessary Equipment
1–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Prerequisites
1–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Prerequisites
1–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Firmware Prerequisites
1–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Prerequisites
1–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Record Adapter Information
1–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the Switch Settings
1–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Installing the FWD SCSI Adapter
Remove SBC from the Card Cage.
2–2
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove blank plate from front panel.
2–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For Model 743 only, install new Boot ROM if required.
2–5
.
. . . . . . . . . . . . . . . . . . . . . . .
Install FWD SCSI Adapter card.
2–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replace the SBC in the Card Cage.
2–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the disk drives.
2–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Verify the operation of the FWD SCSI adapter.
2–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .