HP NC4621 HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide - Page 17

Press, to install the 4th file: HP iSCSI HBA Driver., A Windows setup screen shows the iSCSI Target.

Add to My Manuals
Save this manual to your list of manuals

10. Press Enter to install the 4th file: HP iSCSI HBA Driver. 11. A Windows setup screen shows the iSCSI Target. Installation and configuration 17

Section	Page
HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide	1
Notice	2
Contents	3
Overview	4
iSCSI boot for Windows overview	4
Accelerated iSCSI Boot	4
Limitations	4
System requirements	4
Installation and configuration	6
Downloading the SoftPaq	6
Installing iSCSI boot	6
Installing the iSCSI boot option ROM	6
Initialize iSCSI boot configuration parameters	6
Configure iSCSI boot server	10
Windows Server 2008 installation	12
Add HP drivers to the Microsoft Windows 2008 DVD WIM image	12
Load the HP drivers into the Windows Server 2008 Setup	13
Windows Server 2003 installation	13
Installing Windows Server 2003 using an F6 install	13
Post installation procedures	18
Install Microsoft iSCSI Software Initiator	19
Set up crash dump support	19
Troubleshooting	20
Known issues	20
Using a diagnostic monitor for troubleshooting	20
Target connection problems	20
Target login problems	21
Boot problems	21
LUN access problems	21
OS problems	21
Technical support	23
Before you contact HP	23
HP contact information	23
Acronyms and abbreviations	24

Match case Limit results 1 per page

Installation and configuration 17

10.

Press

Enter

to install the 4th file: HP iSCSI HBA Driver.

11.

A Windows setup screen shows the iSCSI Target.