HP NC4621 HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide - Page 8

Variable name Descr ipti on Exam ple CHAPSecret Secret password for CHAP authentication. Specified as a string or a long hex value (starting with "0x"). This value must be at least 96 bits (12 bytes, 24 hex digits) long. CHAPSecret=password1234 CHAPMSecret Secret password for CHAP authentication. Specified as a string or a long hex value (starting with "0x"). This value must be at least 96 bits (12 bytes, 24 hex digits) long. CHAPMSecret=anotherpassword VLAN VLAN number that the iSCSI VLAN=Disabled initiator uses for all sent and received packets. This value is specified as the VLAN number or "Disabled" if no VLAN is used. ForceBoot Replaces embedded hard ForceBoot=False drive C:\ (if present), regardless of ROM-based setup utilities (RBSU) controller order. Set to False for servers that support the network adapter in the RBSU controller order menu. UseBIOSInterface Set to True for Windows 2003 installation. Set to False for Linux installation. Leaves Int 13 interface enabled to avoid TCP/IP timeouts during long periods of inactivitiy. UseBIOSInterface=True WindowsHBAMode • Set to True for Windows WindowsHBAMode=True 2003 installation to use bxois Fastpath feature that is pure HBA. • Set to False for Windows to boot using NDIS native method. HeaderDigest Enable HeaderDigest (CheckSum). Must match target setting or the session will not be established. HeaderDigest=False DataDigest Enable DataDigest (CheckSum). Must match target setting or the session will not be established DataDigest=False The following is a sample EV configuration file. ## # Copyright 2008 Hewlett-Packard Development Company, L.P. Installation and configuration 8