HP NetServer LP 1000r Installing IBM OS/2 on an HP Netserver - Page 15
Procedure Two, Label a blank diskette HP NetServer IBM OS/2 Warp Drivers/Utilities Diskette.
View all HP NetServer LP 1000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Select OS/2. 5. From the menu, select the version of OS/2 that you want to Install. Select "Warp 3.0" for any version of Warp that you want to install. (Starting with Navigator CD-ROM version G.00.10 this selection button is called "Warp Family". 6. Read the information provide on the "Configuration Advisor" panel. Save it to disk if you desire. 7. Select Continue. 8. From the "Custom Configuration" menu select "Create Drivers Diskette". Starting March 1997 the OS/2 drivers were split into two diskettes as follows. Diskette #1: Contains the SCSI - DAC drivers and utility. Diskette #2: Contains the NIC drivers. To create the Driver Diskettes: A) Select "COPY ALL" to create the two driver diskettes. B) Insert Diskette when prompted and follow the instructions. C) Click exit when done. D) Click Yes, to reboot the system 9. Label a blank diskette "HP NetServer IBM OS/2 Warp Drivers/Utilities Diskette". Insert this diskette in drive A and select "Execute". 10. Remove the HP Navigator CD-ROM. Keep the newly created "Drivers/Utilities" diskette in the floppy drive. 11. Click on Exit. Select Yes to reboot system. Continue to Task 5. Procedure Two This is an alternate procedure for Creating the "Drivers/Utilities" diskette using a section called "Diskette Library" on the Navigator CDROM. The following example lists the steps required to create the two drivers diskette for a NetServer E 40. The same steps apply to other models. NOTE: Starting March 1997 the OS/2 drivers were split into two diskettes. Diskette #1: Contains the SCSI - DAC drivers and utility. Diskette #2: Contains the NIC drivers Keep in mind that if you need high resolution video, you will need to create a third video driver's diskette. 15