HP Nx5000 HP Compaq nc6000 Notebook PC - Maintenance and Service Guide - Page 132
Slide the top cover to the left, degree angle.
View all HP Nx5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Removal and Replacement Procedures 4. Turn the notebook right-side up, with the front facing you. 5. Disconnect the RTC battery cable 1 from the system board. 6. Release the ZIF connector 2 to which the TouchPad cable is attached and disconnect the TouchPad cable 3. 7. Lift the right side of the top cover 4 until it rests at a 45-degree angle. 8. Slide the top cover to the left 5 to disengage the audio connectors 6 from the top cover. 9. Remove the top cover. Removing the Top Cover Reverse the above procedure to install the top cover. 5-46 Maintenance and Service Guide
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the notebook right-side up, with the front facing you.
5. Disconnect the RTC battery cable
1
from the system board.
6. Release the ZIF connector
2
to which the TouchPad cable is
attached and disconnect the TouchPad cable
3
.
7. Lift the right side of the top cover
4
until it rests at a
45-degree angle.
8. Slide the top cover to the left
5
to disengage the audio
connectors
6
from the top cover.
9. Remove the top cover.
Removing the Top Cover
Reverse the above procedure to install the top cover.