HP Nx5000 HP Compaq nx5000 Notebook PC - Maintenance and Service Guide - Page 161
Lift the board straight up to remove it, board to the base enclosure.
View all HP Nx5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Removal and Replacement Procedures 3. Release the ZIF connector 1 on the system board to which the LED board cable is attached, and then disconnect the cable 2. 4. Remove the PM1.5x4.0 screw 3 that secures the LED board to the base enclosure. 5. Lift the board straight up to remove it 4. 6. Release the ZIF connector 5 on the LED board to which the LED board cable is attached and disconnect the cable 6. Removing the LED Board Reverse the above procedure to install the LED board. Maintenance and Service Guide 5-53
Removal and Replacement Procedures
Maintenance and Service Guide
5–53
3. Release the ZIF connector
1
on the system board to which
the LED board cable is attached, and then disconnect the
cable
2
.
4. Remove the PM1.5x4.0 screw
3
that secures the LED
board to the base enclosure.
5. Lift the board straight up to remove it
4
.
6. Release the ZIF connector
5
on the LED board to which the
LED board cable is attached and disconnect the cable
6
.
Removing the LED Board
Reverse the above procedure to install the LED board.