HP OMEN 15-dc1000 Maintenance and Service Guide - Page 49
Solid-state drive (SSD), Remove the Phillips M2.0×2.0 screw
![]() |
View all HP OMEN 15-dc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Solid-state drive (SSD) Table 5-3 Solid-state drive description and part number Description Solid-state drive 128 GB 256 GB 512 GB 16 GB Optane Memory Module 32 GB Optane Memory Module + 512 GB solid-state drive Spare part number L24339-001 L24340-001 L24341-001 L24342-001 L51797-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 34). 2. Remove the base enclosure (see Base enclosure on page 34). Remove the solid-state drive: 1. Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board. 2. Remove the drive by pulling it away from the connector (2). NOTE: M.2 solid-state drives are designed with notches to prevent incorrect insertion. Reverse this procedure to install the solid-state drive. Component replacement procedures 39
![](/manual_guide/products/hewlettpackard-omen-15dc0000-maintenance-service-guide-4003cda/49.png)