HP OMEN 15-dc1000 Maintenance and Service Guide - Page 57

Smart card board, Disconnect the smart card reader cable

Get HP OMEN 15-dc1000 PDF manuals and user guides View all HP OMEN 15-dc1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Smart card board Table 6-3 Smart card board description and part number Description Smart card board Spare part number L14374-001 Before removing the card reader, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 34). 2. Remove the base enclosure (see Base enclosure on page 34). 3. Remove the battery (see Battery on page 45). 4. Remove the hard drive (see Hard drive (HDD) on page 37). 5. Remove the solid-state drive (see Solid-state drive (SSD) on page 39). NOTE: Before you remove the smart card reader, make sure nothing (memory card or plastic insert) in inserted in the reader. Remove the smart card reader: 1. Disconnect the smart card reader cable (1) from the connector on the system board. 2. Remove the two Phillips screws (2) that secure the smart card reader to the computer. 3. Remove the smart card reader from the computer (3). Reverse this procedure to install the smart card reader. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Smart card board
Table 6-3
Smart card board description and part number
Description
Spare part number
Smart card board
L14374-001
Before removing the card reader, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
34
).
2.
Remove the base enclosure (see
Base enclosure
on page
34
).
3.
Remove the battery (see
Battery
on page
45
).
4.
Remove the hard drive (see
Hard drive (HDD)
on page
37
).
5.
Remove the solid-state drive (see
Solid-state drive (SSD)
on page
39
).
NOTE:
Before you remove the smart card reader, make sure nothing (memory card or plastic insert) in
inserted in the reader.
Remove the smart card reader:
1.
Disconnect the smart card reader cable
(1)
from the connector on the system board.
2.
Remove the two Phillips screws
(2)
that secure the smart card reader to the computer.
3.
Remove the smart card reader from the computer
(3)
.
Reverse this procedure to install the smart card reader.
Component replacement procedures
47