HP Officejet 7610 Getting Started Guide - Page 4

English Fax Set up fax Find setup information (for users in Europe) Check the "Finding fax setup information in Europe" box. If your country/region is listed, visit the website for setup information. If it is not listed, follow the instructions in this guide. Finding fax setup information in Europe If you are in one of the following countries/regions, visit www.hp.com/uk/faxconfig for information about setting up fax. Austria Belgium Denmark Finland France Germany Ireland Italy Norway Netherlands Portugal Spain Sweden Switzerland United Kingdom Connect the phone line Using the phone line for fax only Note: If a phone cord is provided with the printer, HP recommends that you use this phone cord. If the phone cord is not long enough, use a coupler and another phone cord to extend. 1. Connect one end of the phone cord to the phone wall jack. 2. Connect the other end to the port labeled 1-LINE on the back of the printer. Note: Do not insert into the port labeled 2-EXT. 3. If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the printer port labeled 1-LINE and the phone wall jack. How do I set up HP printers in digital phone environments? HP printers are designed specifically for use with traditional analog phone services. If you are in a digital phone environment (such as DSL/ADSL, PBX, ISDN, or FoIP), you might need to use digital-to-analog filters or converters when setting up the printer for faxing. Note: The printer might not be compatible with all digital service lines or providers in all digital environments or with all digital-to-analog converters. Contact your phone company to determine which setup options are best for you. Note: If you are setting up ring pattern detection in a PBX phone system that has different ring patterns for internal and external calls, make sure you dial the fax number of your printer using an external number when recording the ring pattern. 1. Phone wall jack 2. Port labeled 1-LINE on the back of the printer Note: Do not insert into the port labeled 2-EXT. 3. DSL/ADSL filter (provided by the telephone company or service provider) 4