HP Officejet Pro 6830 Getting Started Guide - Page 4

Set up fax

Page 4 highlights

English Fax Set up fax 1 For users in Europe If you are in one of these countries/regions, visit www.hp.com/uk/faxconfig for information about setting up fax; otherwise, follow the instructions in the rest of this guide. Austria Belgium Denmark Finland France Germany Ireland Italy Norway Netherlands Portugal Spain Sweden Switzerland United Kingdom 2 Connect the phone line Using the phone line for fax only If a phone cord is provided with the printer, HP recommends that you use this phone cord. If the phone cord is not long enough, use a coupler and another phone cord to extend. 1. Connect one end of the phone cord to the phone wall jack. 2. Connect the other end to the port labeled 1-LINE on the back of the printer. DO NOT insert the phone cord into the port labeled 2-EXT. 3. If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the printer port labeled 1-LINE and the phone wall jack. 2 1 1-LINE 3 1 1 Phone wall jack Port labeled 1-LINE on the back of the printer 2 DO NOT insert the phone cord into the port labeled 2-EXT. 3 DSL/ADSL filter (provided by the telephone company or service provider) 3 Connect additional devices If you have other devices to connect, connect them as shown in the diagram below: 1 54 1-LINE 2-EXT 1 8 5 1-LINE 10 2-EXT 1 1-LINE 9 23 1-LINE 6 2-EXT 57 1-LINE 56 7 1 Phone wall jack 2 Parallel splitter 3 DSL/ADSL modem 4 Telephone answering machine 5 Telephone 6 ISDN wall jack 7 Terminal adapter or ISDN router 8 Broadband modem 9 DSL/ADSL filter 10 Analog telephone adaptor * TAM: Telephone answering machine ** FoIP: Fax over Internet Protocol 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

4
1
Phone wall jack
2
Parallel splitter
3
DSL/ADSL modem
4
Telephone answering machine
5
Telephone
6
ISDN wall jack
7
Terminal adapter or ISDN router
8
Broadband modem
9
DSL/ADSL filter
10
Analog telephone adaptor
Connect additional devices
If you have other devices to connect, connect them as shown in the diagram below:
2-EXT
1-LINE
1
4
5
1-LINE
2-EXT
1
8
5
10
1-LINE
1
2
3
9
1-LINE
2-EXT
1-LINE
6
6
5
5
7
7
TAM: Telephone answering machine
FoIP: Fax over Internet Protocol
*
**
3
Connect the phone line
Using the phone line for fax only
If a phone cord is provided with the printer, HP recommends that you use this phone cord. If the phone cord is not long
enough, use a coupler and another phone cord to extend.
1.
Connect one end of the phone cord to the phone wall jack.
2.
Connect the other end to the port labeled
1-LINE
on the back of the printer.
DO NOT insert the phone cord into the port labeled
2-EXT
.
3.
If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the
printer port labeled
1-LINE
and the phone wall jack.
2
1
Phone wall jack
2
Port labeled
1-LINE
on the back of the printer
DO NOT insert the phone cord into the port
labeled 2-EXT.
3
DSL/ADSL filter (provided by the telephone
company or service provider)
1-LINE
2
1
1
3
For users in Europe
If you are in one of these countries/regions, visit
www.hp.com/uk/faxconfig
for information about setting up fax;
otherwise, follow the instructions in the rest of this guide.
Austria
Belgium
Denmark
Finland
France
Germany
Ireland
Italy
Norway
Netherlands
Portugal
Spain
Sweden
Switzerland
United Kingdom
1
Fax
Set up fax
English