HP OmniBook 7150 HP OmniBook 7100 - User Guide Plug-In Module - Page 21

Troubleshooting 7SPZMRK 4VSFPIQW [MXL 4PYK-R 1SHYPIW Solving Problems with Plug-In Modules If your OmniBook plug-in module doesn't seem to work properly, find the symptom below that matches your situation. Try the suggestions one at a time. This section separates problems into the following categories: ♦ CD-ROM / floppy drive problems. ♦ LS-120 drive problems. ♦ DVD drive problems. ♦ Battery problems. CD-ROM / Floppy Drive Problems If the CD-ROM drive stops responding • Remove and reinsert the CD-ROM disk. • Reset the OmniBook. • Remove and reinsert the CD-ROM / floppy drive module. If you cannot boot from a CD in the CD-ROM drive • Check that the CD is bootable. • Reset the OmniBook. • Remove and reinsert the CD-ROM / floppy drive module. • Run the BIOS Setup utility to make sure that the CD-ROM drive is the first boot device. See the OmniBook Reference Guide for instructions on running the BIOS Setup utility. If the floppy drive doesn't work • Remove and reinsert the floppy disk. • Remove and reinsert the CD-ROM / floppy drive module. 1-21