HP OmniBook 800 HP OmniBook 800 - 5/166 CD-ROM User Guide - Page 9
Entering Power Save Mode
 |
View all HP OmniBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
In the Confirm Device Removal box, enable Remove from specific configuration. Under Configuration, select Undocked, then click the OK button. To turn off or disconnect the CD-ROM drive, see "To turn off the CD-ROM drive," the next topic below. Entering Power Save Mode During periods of inactivity, the CD-ROM drive saves power by turning off the laser and stopping the drive motor. This occurs under the following conditions: • When the CD-ROM drive receives no commands from the OmniBook for 4 minutes (if they're connected), and • When you don't press any buttons for 4 minutes. 1-9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
 |
 |
1-9
In the Confirm Device Removal box, enable
Remove from specific configuration
.
Under Configuration, select Undocked, then click the OK button.
To turn off or disconnect the CD-ROM drive, see “To turn off the CD-ROM drive,” the
next topic below.
Entering Power Save Mode
During periods of inactivity, the CD-ROM drive saves power by turning off the laser
and stopping the drive motor. This occurs under the following conditions:
•
When the CD-ROM drive receives no commands from the OmniBook for
4 minutes (if they’re connected), and
•
When you don’t press any buttons for 4 minutes.