HP P3005dn HP LaserJet P3005 - Software Technical Reference - Page 244

● Manual Feed in Tray 1 ● Tray 1 (100-sheet multipurpose tray) ● Tray 2 (500 -sheet tray) ● Tray 3 (optional 500-sheet tray) The default setting is Automatically Select. When this setting is selected, the HP LaserJet P3005 uses the source tray that supports the selected media size. If you select a source tray other than Automatically select, make sure that the correct media size is loaded in the source tray. For information about media sources, see the Media attributes on page 344 section of this STR. Type is The Type is: drop-down menu shows all of the media types that the HP LaserJet P3005 printer supports. When you use the default setting, Unspecified, the printer uses the default media type, which is usually Plain. No mechanism exists for manually adding custom media types through the driver. Custom types can be added only by using the bidirectional communication mechanism, so they must already exist in the device when the bidirectional query occurs. If bidirectional communication is enabled, then the information an updated list of media types is returned. If bidirectional communication is not enabled, then the driver looks for custom media types that have been saved from a previous bidirectional communication query, and uses those. Otherwise, no custom media types are available through the driver. The following standard types appear in the list: ● Unspecified ● Plain ● Preprinted ● Letterhead ● Transparency ● Prepunched ● Labels ● Bond ● Recycled ● Color ● Light 60-75 g/m2 (16-20 lb) ● Heavy 91-164 g/m2 (25-43 lb) ● Cardstock 164-200 g/m2 (45-53 lb) ● Rough ● Vellum ● Envelope 220 Chapter 5 HP PCL 6, PCL 5, and PS emulation unidrivers for MS Windows ENWW