HP PageWide 377 User Guide - Page 34
To connect the product to a wireless network using the Wireless Setup Wizard
View all HP PageWide 377 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
If your wireless router does not support Wi-Fi Protected Setup (WPS), obtain the wireless router network settings from your system administrator, or complete the following tasks. ● Obtain the wireless network name or service set identifier (SSID). ● Determine the security password or encryption key for the wireless network. NOTE: Before installing the product software, make sure the product is not connected to the network using an Ethernet cable. To connect the product to a wireless network using the Wireless Setup Wizard The Wireless Setup Wizard is the best method for installing the product on a wireless network. 1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or touch the dashboard area on the home screen). 2. On the control panel dashboard, touch . 3. Touch Network Setup, and then touch Wireless Settings. 4. Touch Wireless Setup Wizard. 5. The product scans for available wireless networks and returns a list of network names (SSIDs). Select the SSID for your wireless router from the list if it is available. If the SSID for your wireless router is not in the list, touch Enter SSID. When prompted for the type of network security, select the option that your wireless router uses. A keypad opens on the control panel display. 6. Do one of the following: ● If your wireless router uses WPA security, type the passphrase on the keypad. ● If your wireless router uses WEP security, type the key on the keypad. 7. Touch OK , and wait while the product establishes a connection with the wireless router. Establishing the wireless connection can take a few minutes. To connect the product to a wireless network using WPS Before you can connect your printer to a wireless network using WPS, make sure you have the following: ● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point. NOTE: The printer supports only connections using 2.4GHz. ● A computer connected to the wireless network that you intend to connect the printer to. Be sure you have installed the HP printer software on the computer. If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your router has a push button, follow the PIN method. 18 Chapter 2 Connect the product ENWW