HP PageWide Enterprise Color 556 User Guide - Page 89
HP Embedded Web Server Networking tab, Table 5-7
View all HP PageWide Enterprise Color 556 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Table 5-7 HP Embedded Web Server Networking tab Menu Description Wireless Direct Print Settings Configure Wireless Direct Print for printers that include embedded Wireless Direct Print and NFC printing or that have a wireless accessory installed. NOTE: The configuration options available depend on the print server model. TCP/IP Settings Configure TCP/IP settings for IPv4 and IPv6 networks. NOTE: The configuration options available depend on the print server model. Network Settings Configure IPX/SPX, AppleTalk, DLC/LLC, and SNMP settings, depending on the print server model. Other Settings Configure general printing protocols and services supported by the print server. The available options depend on the print server model, but can include firmware update, LPD queues, USB settings, support information, and refresh rate. AirPrint Enable, set up, or disable network printing from Apple supported printers. Select Language Change the language displayed by the HP Embedded Web Server. This page displays if the Web pages support multiple languages. Optionally, select supported languages through language-preference settings in the browser. Settings View and restore current security settings to factory-default values. Configure security settings using the Security Configuration Wizard. NOTE: Do not use the Security Configuration Wizard to configure security settings using network-management applications, such as HP Web Jetadmin. Authorization Control configuration management and use of this printer, including the following: ● Set or change the administrator password to control access to configuration parameters. ● Request, install, and manage digital certificates on the HP Jetdirect print server. ● Limit host access to this printer through an Access Control List (ACL) (for selected print servers on IPv4 networks only). Mgmt. Protocols Configure and manage security protocols for this printer, including the following: ● Set the security management level for the HP Embedded Web Server, and control traffic over HTTP and HTTPS. ● Configure the SNMP (Simple Network Management Protocol) operation. Enable or disable the SNMP v1/v2c or SNMP v3 agents on the print server. ● Control access through protocols that may not be secure, such as printing protocols, print services, discovery protocols, name resolution services, and configuration-management protocols. 802.1X Authentication (For selected HP Jetdirect models only) Configure 802.1X authentication settings on the Jetdirect print server as required for client authentication on the network, and reset the 802.1X authentication settings to factory-default values. CAUTION: When changing the 802.1X authentication settings; the printer might lose its connection. To reconnect, it might be necessary to reset the print server to a factorydefault state and reinstall the printer. IPsec/Firewall View or configure a Firewall policy or an IPsec/Firewall policy. (For selected HP Jetdirect models only) ENWW Advanced configuration with HP Embedded Web Server (EWS) 79