HP PageWide Managed Color MFP P77950 User Guide - Page 129
Method two: Use Scan to Network Folder Setup, Step one: Begin the configuration
View all HP PageWide Managed Color MFP P77950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
a. In the UNC Folder Path field, type a folder path where the scan will go. The folder path can either be the fully-qualified domain name (FQDN) (e.g., \ \servername.us.companyname.net\scans) or the IP address of the server (e.g., \\16.88.20.20\scans). Be sure that the folder path (e.g., \scans) follows the FQDN or IP address. NOTE: The FQDN can be more reliable than the IP address. If the server gets its IP address via DHCP, the IP address can change. However, the connection with an IP address might be faster because the printer does not need to use DNS to find the destination server. b. From the Authentication Settings drop-down, select one of the following options: ● Use credentials of user to connect after Sign In at the control panel ● Always use these credentials NOTE: If Always use these credentials is selected, a user name and password must be entered in the corresponding fields, and the printer's access to the folder must be verified by clicking Verify Access. c. In the Windows Domain field, type the Windows domain. TIP: To find the Windows domain in Windows 7, click Start, click Control Panel, and then click System. To find the Windows domain in Windows 8, click Search, enter System in the search box, and then click System. The domain is listed under Computer name, domain, and workgroup settings. d. Click Next. 7. On the Configure File Scan Settings dialog, set the default scanning preferences for the Quick Set, and then click Next. 8. Review the Summary dialog, and then click Finish. Method two: Use Scan to Network Folder Setup This option enables advanced configuration of the Save to Network Folder feature using the HP Embedded Web Server (EWS) for the printer. Step one: Begin the configuration 1. Click the Scan/Digital Send tab. 2. On the left navigation menu, click the Scan to Network Folder Setup link. Step two: Configure the Scan to Network Folder settings 1. On the Scan to Network Folder Setup page, select the Enable Scan to Network Folder check box. If this box is not selected, the feature is unavailable at the printer control panel. 2. In the Scan to Network Folder area of the left navigation pane, click Quick Sets. Click Add to open the Quick Sets Setup dialog. NOTE: Quick Sets are short-cut jobs that can be accessed on the printer Home screen or within the Quick Sets application. ENWW Set up Scan to Network Folder 117