HP Pavilion 10 TouchSmart 10z-f100 HP Pavilion 10 Notebook PC Maintenance and - Page 47

WLAN/Bluetooth combo card, Position the top cover upside down.

Page 47 highlights

WLAN/Bluetooth combo card Select models use a card that provides both WLAN and Bluetooth functionality. Description 802.11bgn 1x1 Wi-Fi Adapter (Single antenna) 802.11bgn 1x1 Wi-Fi Adapter (Single antenna) Bluetooth 4 Combo HMC Spare part number 675794-001 753077-001 Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard (see Keyboard on page 25). 5. Remove the base enclosure (see Base enclosure on page 28). 6. Remove the battery (see Battery on page 36). Remove the WLAN module: 1. Position the top cover upside down. 2. Disconnect the WLAN cable (1). 3. Remove the Phillips screw (2) that secures the WLAN module to the top cover. Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

WLAN/Bluetooth combo card
Select models use a card that provides both WLAN and Bluetooth functionality.
Description
Spare part number
802.11bgn 1x1 Wi-Fi Adapter (Single antenna)
675794-001
802.11bgn 1x1 Wi-Fi Adapter (Single antenna) Bluetooth 4 Combo HMC
753077-001
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard (see
Keyboard
on page
25
).
5.
Remove the base enclosure (see
Base enclosure
on page
28
).
6.
Remove the battery (see
Battery
on page
36
).
Remove the WLAN module:
1.
Position the top cover upside down.
2.
Disconnect the WLAN cable
(1)
.
3.
Remove the Phillips screw
(2)
that secures the WLAN module to the top cover.
Component replacement procedures
37