HP Pavilion 10 TouchSmart 10z-f100 HP Pavilion 10 Notebook PC Maintenance and - Page 50
Hard drive, Remove the four Phillips 2.5×3.5 screws that secure the hard drive to the top cover
View all HP Pavilion 10 TouchSmart 10z-f100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Hard drive Description 500-GB, 5400-rpm Spare part number 778186-005 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard (see Keyboard on page 25). 5. Remove the base enclosure (see Base enclosure on page 28). 6. Remove the battery (see Battery on page 36). To remove a hard drive: 1. Position the top cover upside down on a flat surface. Remove the four Phillips 2.5×3.5 screws that secure the hard drive to the top cover (1). NOTE: Some models may only have two screws. 2. Lift the hard drive (2) out of the hard drive bay. NOTE: The top side of the top cover has a small hole that you can push through to release the hard drive. 40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts