HP Pavilion 15-cc000 Maintenance and Service Guide 1 - Page 51
Solid-state drive, Remove the Phillips PM2.0×2.3 screw
View all HP Pavilion 15-cc000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Solid-state drive Description 512-GB, 2280 M.2, SATA-3, solid-state drive with TLC 256-GB, 2280 M.2, SATA-3, solid-state drive with TLC 128-GB, 2280 M.2, SATA-3, solid-state drive with TLC 256-GB, 2280 M.2, SATA-3, solid-state drive 128-GB, 2280 M.2, SATA-3, solid-state drive Spare part number 763008-020 760615-039 759848-020 865902-019 827560-051 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.3 screw (1) that secures the drive to the system board. 2. Remove the drive (2) by pulling it away from the connector. NOTE: Solid-state drives are designed with notches to prevent incorrect insertion. Reverse this procedure to reassemble and install the solid-state drive. Component replacement procedures 43