HP Pavilion 15-cc000 Maintenance and Service Guide 1 - Page 55
TouchPad, Remove the three Phillips PM2.0×3.0 screws
View all HP Pavilion 15-cc000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TouchPad NOTE: The TouchPad spare part kit includes the TouchPad cable, but does not include the TouchPad bracket. The TouchPad bracket is available using spare part number 926879-001. Description TouchPad Spare part number L01118-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the TouchPad: 1. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. 3. Remove the TouchPad bracket (3) . 4. Remove the three Phillips PM2.0×3.0 broad head screws (4) that secure the TouchPad to the keyboard/ top cover. 5. Remove the TouchPad (5). Component replacement procedures 47