HP Pavilion 15-cc000 Maintenance and Service Guide 1 - Page 64
Heat sink, Battery see
View all HP Pavilion 15-cc000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
6. Remove the system board (2) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description For use only on computer models equipped with a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 927920-001 927919-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Fan (see Fan on page 50) c. System board (see System board on page 52) Remove the heat sink: NOTE: Steps 1 and 2 apply to computer models equipped with a graphics subsystem with discrete memory. See Steps 3 and 4 for heat sink removal information for computer models equipped with a graphics subsystem with UMA memory. 1. Remove the six Phillips PM2.0×3.0 screws (1) that secure the heat sink to the system board. 56 Chapter 5 Removal and replacement procedures