HP Pavilion 15-e100 Pavilion 15 Notebook PC Maintenance and Service Guide - Page 55

Optical drive, Remove the Phillips PM2.5×3.5 screw

Get HP Pavilion 15-e100 PDF manuals and user guides View all HP Pavilion 15-e100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Optical drive NOTE: This section applies only to computer models equipped with an Intel processor. Description DVD+/-RW Double Layer SuperMulti Drive Spare part number 720671-001 Before removing the optical drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 46). Remove the optical drive: 1. Loosen the Phillips PM3.0×10.0 captive screw (1) that secures the service cover to the computer. 2. Slide the service cover (2) forward until it disengages from the computer. 3. Remove the service cover (3). The service cover is available using spare part number 719872-001. 4. Position the computer with the left side toward you. 5. Remove the Phillips PM2.5×3.5 screw (1) that secures the optical drive to the computer. 6. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the left to release the optical drive from the computer. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Optical drive
NOTE:
This section applies only to computer models equipped with an Intel processor.
Description
Spare part number
DVD+/-RW Double Layer SuperMulti Drive
720671-001
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
46
).
Remove the optical drive:
1.
Loosen the Phillips PM3.0×10.0 captive screw
(1)
that secures the service cover to the computer.
2.
Slide the service cover
(2)
forward until it disengages from the computer.
3.
Remove the service cover
(3)
.
The service cover is available using spare part number 719872-001.
4.
Position the computer with the left side toward you.
5.
Remove the Phillips PM2.5×3.5 screw
(1)
that secures the optical drive to the computer.
6.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access
(2)
and press the
tab to the left to release the optical drive from the computer.
Component replacement procedures
47