HP Pavilion Elite m9100 Upgrading and Servicing Guide - Page 7
After closing the computer, Removing the side panel, lift it off the chassis.
View all HP Pavilion Elite m9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
After closing the computer To avoid injury and equipment damage, always complete the following steps, in this order, after closing the computer: 1 Reconnect the power cord to the computer and to the electrical outlet. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface card (NIC) (labeled as an Ethernet connector). 2 Reconnect the modem/telephone cable and all other cables (such as the keyboard, mouse, and monitor cables). 3 Reconnect the external devices. 4 Turn on the computer and all peripherals, such as the monitor. 5 If you installed an add-in card, install any software drivers supplied by the card manufacturer. Removing the side panel 1 See "Before opening the computer" on page 2. 2 Loosen the thumbscrew (A) that secures the side panel to the computer chassis. You may need to use a screwdriver the first time you loosen the screw. A 3 Use the handle to slide the side panel back about 1 inch (2.5 centimeters), and then lift it off the chassis. WARNING: Beware of sharp edges inside the chassis. Upgrading and Servicing Guide 3