HP Pavilion dm1 HP Pavilion dm1 Notebook PC - Maintenance and Service Guide - Page 67
Flex the inside edges of the top edge
View all HP Pavilion dm1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4. Remove the wireless antenna cables from the clips (2) and routing channel built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 5. Remove the 4 PM2.0×5.0 screws (1) that secure the display assembly to the base enclosure. 6. Lift the display assembly (2) straight up and remove it. 7. If it is necessary to replace the display bezel or any of the display assembly internal components: a. Insert a thin-bladed tool between the hinge covers and the hinges to remove the hinge covers (1). b. Flex the inside edges of the top edge (2), the left and right sides (3), and the bottom edge (4) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 59