HP Pavilion dv4-4000 HP Pavilion dv4 Entertainment PC - Maintenance and Servic - Page 67
Release the ZIF connector
View all HP Pavilion dv4-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
6. Lift the rear edge of the keyboard (1), and then swing the keyboard up and forward (2) until it rests upside down on the palm rest. 7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then disconnect the keyboard cable (2) from the system board. NOTE: Step 8 applies only to computer models equipped with a keyboard with backlight. 8. Release the ZIF connector (3) to which the keyboard backlight cable is attached, and then disconnect the keyboard backlight cable (4) from the system board. 9. Remove the keyboard. Component replacement procedures 59
6.
Lift the rear edge of the keyboard
(1)
, and then swing the keyboard up and forward
(2)
until it
rests upside down on the palm rest.
7.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
then disconnect the keyboard cable
(2)
from the system board.
NOTE:
Step 8 applies only to computer models equipped with a keyboard with backlight.
8.
Release the ZIF connector
(3)
to which the keyboard backlight cable is attached, and then
disconnect the keyboard backlight cable
(4)
from the system board.
9.
Remove the keyboard.
Component replacement procedures
59