HP Pavilion dv6-2000 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 70
This cable connects to a LIF connector on the system board., Fingerprint reader board cable
View all HP Pavilion dv6-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removal and replacement procedures 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the following cables from the system board: a. TouchPad cable 1 ✎ On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board. On computer models equipped with a Flush Glass display assembly, this cable connects to a LIF connector on the system board. b. Fingerprint reader board cable 2 ✎ This cable connects to a LIF connector on the system board. c. Speaker cable 3 ✎ Step 6 applies only to computer models equipped with standard display assemblies. 6. Remove the four Phillips PM2.5×4.0 screws that secure the top cover to the computer. 7. Remove the Phillips PM2.5×7.0 screw that secures the top cover to the computer. Maintenance and Service Guide 4-31