HP Pavilion dv6-2000 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 75

Power connector cable, Hard drive see

Get HP Pavilion dv6-2000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv6-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Removal and replacement procedures Remove the USB board: 1. Disconnect the USB board cable 1 from the LIF connector on the system board. 2. Remove the Phillips PM2.5×6.5 screw 2 that secures the USB board to the base enclosure. 3. Remove the USB board 3 from the base enclosure. Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 533465-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the following components: a. Hard drive (see "Hard drive" on page 4-14) b. Optical drive (see "Optical drive" on page 4-9) c. Switch cover and keyboard (see "Switch cover and keyboard" on page 4-18) d. Display assembly (see "Display assembly" on page 4-24) e. Top cover (see "Top cover" on page 4-30). f. USB board (see "USB board" on page 4-35) g. System board (see "System board" on page 4-37) Remove the power connector cable: 4-36 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
4–36
Maintenance and Service Guide
Removal and replacement procedures
Remove the USB board:
1. Disconnect the USB board cable
1
from the LIF connector on the system board.
2. Remove the Phillips PM2.5×6.5 screw
2
that secures the USB board to the base enclosure.
3. Remove the USB board
3
from the base enclosure.
Reverse this procedure to install the USB board.
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-6
).
5. Remove the following components:
a.
Hard drive (see
“Hard drive” on page 4-14
)
b.
Optical drive (see
“Optical drive” on page 4-9
)
c.
Switch cover and keyboard (see
“Switch cover and keyboard” on page 4-18
)
d.
Display assembly (see
“Display assembly” on page 4-24
)
e.
Top cover (see
“Top cover” on page 4-30
).
f.
USB board (see
“USB board” on page 4-35
)
g.
System board (see
“System board” on page 4-37
)
Remove the power connector cable:
Description
Spare part number
Power connector cable
533465-001