HP Pavilion dv6-3200 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 80
Remove the Phillips PM2.0×4.0 screw, Remove the display bezel/panel assembly
View all HP Pavilion dv6-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
13. If it is necessary to replace the display enclosure or any of the display assembly internal components: a. Remove the Mylar screw covers (1). The screw covers are included in the Display Miscellaneous Kit, spare part number 603659-001. b. Remove the two Phillips PM2.5×7.0 screws (2) that secure the display enclosure to the display assembly. c. Remove the hinge covers (3). The hinge covers are available using spare part number 603666-001. d. Turn the display assembly upside down, with the hinges toward you. e. Lift the bottom edge of the display bezel/panel assembly (1) until it rests at an angle. f. Disconnect the logo light cable (2) from the display panel cable. g. Remove the display bezel/panel assembly (3). 14. If it is necessary to replace the webcam/microphone module: a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel. b. Release the webcam/microphone module (2) as far as the webcam/microphone module allows. 70 Chapter 4 Removal and replacement procedures