HP Pavilion dv9600 HP Pavilion dv9500, dv9600, and dv9700 Entertainment PCs - - Page 104

until it rests at an angle., system board

Get HP Pavilion dv9600 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv9600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

4. Remove the three Phillips PM2.5×8.0 screws (1) and the three silver Phillips PM2.5×5.0 screws (2) that secure the system board to the base enclosure. 5. Remove the power connector cable (1) and the rear USB board cable (2) from the clips built into the base enclosure. 6. Use the area immediately behind the optical drive connector board (1) to lift the right side of the system board (2) until it rests at an angle. 7. Remove the optical drive connector board (3). The optical drive connector board is available using spare part number 432992-001. 94 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
4.
Remove the three Phillips PM2.5×8.0 screws
(1)
and the three silver Phillips PM2.5×5.0 screws
(2)
that secure the system board to the base enclosure.
5.
Remove the power connector cable
(1)
and the rear USB board cable
(2)
from the clips built into
the base enclosure.
6.
Use the area immediately behind the optical drive connector board
(1)
to lift the right side of the
system board
(2)
until it rests at an angle.
7.
Remove the optical drive connector board
(3)
. The optical drive connector board is available using
spare part number 432992-001.
94
Chapter 4
Removal and replacement procedures