HP Pavilion dx6500 HP Pavilion dx6500 Entertainment PC - Maintenance and Servi - Page 75
USB/power connector board
![]() |
View all HP Pavilion dx6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
USB/power connector board Description USB/power connector board Spare part number 449454-001 Before removing the USB/power connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drives (see Hard drives on page 41) b. Optical drive (see Optical drive on page 47) c. Switch cover (see Switch cover on page 49) d. Keyboard (see Keyboard on page 53) e. Speaker assembly (see Speaker assembly on page 51) f. Display assembly (see Display assembly on page 55) g. Top cover (see Top cover on page 61) Remove the USB/power connector board: 1. Disconnect the USB cable (1) and power connector cable (2) from the system board. 2. Remove the USB/power connector board cable from the clips (3) built into the base enclosure. 3. Remove the Phillips PM2.5×5.0 screw (4) that secures the USB/power connector board to the base enclosure. Component replacement procedures 67
![](/manual_guide/products/hewlettpackard-pavilion-dx6500-hp-pavilion-dx6500-entertainment-pc-maintenance-service-guide-0fbb730/75.png)