HP Pavilion dx6500 HP Pavilion dx6500 Entertainment PC - Maintenance and Servi - Page 77

from the slot., to eject the bezel from the slot.

Get HP Pavilion dx6500 - Notebook PC PDF manuals and user guides View all HP Pavilion dx6500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

h. Audio board (see Audio board on page 71) i. USB/power connector board (see USB/power connector board on page 67) When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (see Memory module on page 43) ● RTC battery (see RTC battery on page 45) ● WLAN module (see WLAN module on page 46) ● Bluetooth module (see Bluetooth module on page 65) ● ExpressCard assembly (see ExpressCard assembly on page 72) ● Fan/heat sink assembly (see Fan/heat sink assembly on page 74) ● Processor (see Processor on page 77) Remove the system board: 1. Press the ExpressCard slot bezel (1) to eject the bezel from the slot. 2. Remove the ExpressCard slot bezel (2) from the slot. 3. Remove the Phillips PM2.5×5.0 screw (3) that secures the system board to the base enclosure. 4. Use the optical drive connector (1) to lift the right side of the system board (2) until it rests at an angle. 5. Disconnect the audio board cable (3) from the system board. Component replacement procedures 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
h
.
Audio board (see
Audio board
on page
71
)
i
.
USB/power connector board (see
USB/power connector board
on page
67
)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules (see
Memory module
on page
43
)
●
RTC battery (see
RTC battery
on page
45
)
●
WLAN module (see
WLAN module
on page
46
)
●
Bluetooth module (see
Bluetooth module
on page
65
)
●
ExpressCard assembly (see
ExpressCard assembly
on page
72
)
●
Fan/heat sink assembly (see
Fan/heat sink assembly
on page
74
)
●
Processor (see
Processor
on page
77
)
Remove the system board:
1
.
Press the ExpressCard slot bezel
(1)
to eject the bezel from the slot.
2
.
Remove the ExpressCard slot bezel
(2)
from the slot.
3
.
Remove the Phillips PM2.5×5.0 screw
(3)
that secures the system board to the base enclosure.
4
.
Use the optical drive connector
(1)
to lift the right side of the system board
(2)
until it rests at an
angle.
5
.
Disconnect the audio board cable
(3)
from the system board.
Component replacement procedures
69