HP Pavilion n6396 HP Pavilion Notebook PC N6000 Series - Reference Guide - Page 134
Modem Reference Ambit
View all HP Pavilion n6396 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Specifications and Regulatory Information Modem Reference Information Command A/ A B0 B1 C1 Dn E0 E1 H0 H1 I0 I1 I2 I3 I4 I5 I6 I7 L0 L1 L2 L3 M0 M1 M2 Selected Result Codes (3Com) Code 0 1 2 3 4 5 6 7 8 Meaning OK CONNECT RING NO CARRIER ERROR CONNECT 1200 NO DIAL TONE BUSY NO ANSWER Modem Reference (Ambit) In the following AT command table, default settings are shown in bold. All listed AT commands except A/ must be preceded by "AT." AT Commands (Ambit) Function (Ambit) Re-execute command (not preceded by AT) Go off-hook and attempt to answer a call Select V.22 connect @1200 bps Select Bell 212A connect @1200 bps Return OK message Dial modifier Turn off command echo Turn on command echo Initiate a hang-up sequence If on-hook, go off-hook and enter command mode Report product code Report pre-computed checksum Report "OK" if the calculated checksum equals the prestored checksum or if the prestored checksum value is FFh Report firmware revision, model, and interface type Report response programmed by OEM Report the country code parameter Report modem data pump model and code revision Report the DAA code Set low speaker volume Set low speaker volume Set medium speaker volume Set high speaker volume Turn speaker off Turn speaker on during handshaking and turn speaker off while receiving carrier Turn speaker on during handshaking and while receiving carrier 134 Reference Guide