HP Pavilion t100 HP Pavilion Desktop PCs - (English) Upgrading and Servicing G - Page 31

Add-In Cards

Get HP Pavilion t100 - Desktop PC PDF manuals and user guides View all HP Pavilion t100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

4 Push straight down on top of the memory module until it is fully seated in the socket. The retaining clips on the ends of the socket automatically lock it into position when the memory module is fully seated. 5 Replace any cabling that was removed. 6 Replace the side panel. See page 5. Add-In Cards At some point, you may want to add a PCI or an AGP card to the PC to accommodate a new component, such as a scanner, or to upgrade an existing card. Warning: Do not overload the system by installing add-in cards that draw excessive current. The system is designed to provide 2 amps (average) of +5 V power for each board/card in the PC. The total +5 V current draw in a fully loaded system (one with all add-in card slots filled) must not exceed the total number of slots multiplied by 2 amps. Upgrading and Servicing the PC 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Upgrading and Servicing the PC
27
4
Push straight down on top of the memory
module until it is fully seated in the socket.
The retaining clips on the ends of the socket
automatically lock it into position when the
memory module is fully seated.
5
Replace any cabling that was removed.
6
Replace the side panel. See page 5.
Add-In Cards
At some point, you may want to add a PCI or an
AGP card to the PC to accommodate a new
component, such as a scanner, or to upgrade an
existing card.
Warning:
Do not overload the system
by installing add-in cards that draw
excessive current. The system is designed
to provide 2 amps (average) of +5 V
power for each board/card in the PC. The
total +5 V current draw in a fully loaded
system (one with all add-in card slots
filled) must not exceed the total number
of slots multiplied by 2 amps.