HP Pavilion t100 HP Pavilion Desktop PCs - (English) Upgrading and Servicing G - Page 32
Removing an Add-In Card
View all HP Pavilion t100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removing an Add-In Card 1 Remove the side panel that has thumbscrews. See page 4. 2 Gently lay the PC on its side. 3 To prepare an empty card slot for a new card, loosen the screw of the expansion slot cover. Remove the cover of the empty slot. 4 If you are replacing a card, make a note of any external or internal cables attached to the card, and then disconnect them. 5 Loosen the screw on the bracket of the card you are replacing. 6 Hold the bracket and the far top corner of the card. Carefully remove the card by pulling the card straight out of the expansion slot. Warning: Be careful of the sharp edges on the expansion slot cover. 28 HP Pavilion home PC
28
HP Pavilion home PC
Removing an Add-In Card
1
Remove the side panel that has thumbscrews.
See page 4.
2
Gently lay the PC on its side.
3
To prepare an empty card slot for a new card,
loosen the screw of the expansion slot cover.
Remove the cover of the empty slot.
4
If you are replacing a card, make a note of
any external or internal cables attached to
the card, and then disconnect them.
5
Loosen the screw on the bracket of the card
you are replacing.
6
Hold the bracket and the far top corner of the
card. Carefully remove the card by pulling the
card straight out of the expansion slot.
Warning:
Be careful of the sharp edges
on the expansion slot cover.