HP Pavilion x2 - 10-k012ca HP Pavilion x2 Detachable PC (model number 10-k0XX) - Page 30
Display panel cable, to which the display panel cable is attached, and then disconnect
View all HP Pavilion x2 - 10-k012ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Display panel cable Description Display panel cable Spare part number 784414-001 Before removing the display panel cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 19). 5. Disconnect the battery cable from the system board (see Battery on page 22). Remove the display panel cable: 1. Release the ZIF connector (1) to which the display panel cable is attached, and then disconnect the display panel cable from the system board. 2. Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect the display panel cable from the display panel assembly. 3. Remove the display panel cable (3). 4. Remove the display panel cable. Reverse this procedure to install the display panel cable. 24 Chapter 5 Removal and replacement procedures