HP Pavilion x2 Maintenance and Service Guide - Page 35

Webcam/microphone module, from the system board.

Get HP Pavilion x2 PDF manuals and user guides View all HP Pavilion x2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Webcam/microphone module Description Webcam/microphone module (includes 2 microphone rubber isolators and double-sided adhesive) NOTE: The webcam/microphone module spare part kit does not include the webcam/microphone module cable. The webcam/microphone module cable is available using spare part number 841550-001. Spare part number 841773-001 Before removing the webcam/microphone module, follow these steps: 1. Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the slate. 3. Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the slate. 4. Disconnect the slate from the keyboard/base. 5. Remove the display panel assembly (see Display panel assembly on page 22). Remove the webcam/microphone module: 1. Disconnect the webcam/microphone module cable (1) from the system board. 2. Release the webcam/microphone module cable from the retention clips (2) built into the display back cover. 3. Remove the microphone rubber isolators (3). The rubber isolators are included in the webcam/microphone module spare part kit. Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Webcam/microphone module
Description
Spare part number
Webcam/microphone module (includes 2 microphone rubber isolators and double-sided adhesive)
NOTE:
The webcam/microphone module spare part kit does not include the webcam/microphone
module cable. The webcam/microphone module cable is available using spare part number
841550-001.
841773-001
Before removing the webcam/microphone module, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is
off
or in Hibernation, turn the slate on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Display panel assembly
on page
22
).
Remove the webcam/microphone module:
1.
Disconnect the webcam/microphone module cable
(1)
from the system board.
2.
Release the webcam/microphone module cable from the retention clips
(2)
built into the display
back cover.
3.
Remove the microphone rubber isolators
(3)
.
The rubber isolators are included in the webcam/microphone module spare part kit.
Component replacement procedures
27