HP Pavilion x2 Maintenance and Service Guide - Page 58
Hinge assembly, from the keyboard/top cover. The keyboard/base docking
View all HP Pavilion x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Hinge assembly Description Hinge bezel Keyboard/base docking cable (includes double-sided adhesive) Hinges (2, includes left and right hinges) Hinge cover Spare part number 841563-001 841553-001 841567-001 841562-001 Before removing the hinge assembly, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the bottom cover (see Bottom cover on page 44). Remove the hinge assembly: 1. Disconnect the keyboard/base docking cables (1) from the docking board. 2. Detach the keyboard/base docking cables (2) from the keyboard/top cover. (The keyboard/base docking cables are attached to the keyboard/top cover with double-sided adhesive.) 3. Release the keyboard/base docking cables (3) from retention clips and routing channel built into the keyboard/top cover. 4. Remove the four Phillips PM2.0×2.4 broadhead screws (4) that secure the hinge assembly to the keyboard/top cover. 50 Chapter 6 Keyboard/base removal and replacement procedures