HP Pavilion x2 Maintenance and Service Guide - Page 54
Docking board, to which the TouchPad board cable is attached
View all HP Pavilion x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Docking board Description Docking board Spare part number 841560-001 Before removing the docking board, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the bottom cover (see Bottom cover on page 44). Remove the docking board: 1. Disconnect the keyboard/base docking cables (1) from the docking board. 2. Release the zero insertion force (ZIF) connector (2) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the docking board. 3. Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable from the docking board. 4. Remove the two Phillips PM2.0×2.4 broadhead screws (4) that secure the docking board to the keyboard/top cover. 5. Remove the docking board (5). Reverse this procedure to install the docking board. 46 Chapter 6 Keyboard/base removal and replacement procedures