HP Photosmart 3100 Setup Guide - Page 5

Close the access door and follow the prompts, Insert all six ink cartridges - printer

Page 5 highlights

11 Insert all six ink cartridges Match the color and pattern of the ink cartridge to the color and a pattern on the print carriage. a Push the black ink cartridge into the first slot on the left. Close the latch. b Repeat with each of the color ink cartridges. c Make sure each latch is secure. b c 12 Close the access door and follow the prompts a a After you close the access door, a prompt appears to load plain white paper. Make sure paper is loaded, and then press OK to start the process. The device initializes the ink cartridges and aligns the printer. This takes approximately 5 minutes. Do not disconnect or turn off the HP All-in-One during b this time. You may hear the device making noises. b After the page prints, the printer is aligned. Check the color graphics display for the status, and then press OK. Recycle or discard the alignment page. If an ink cartridge error message displays, verify that all ink cartridges are inserted and latched. If the error message continues, the initialization ink cartridges may have been damaged. Please call 1-800-474-6838 to receive replacement ink cartridges. HP All-in-One • 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

HP All-in-One • 5
12
11
Close the access door and follow the prompts
a
After you close the access door, a prompt appears to load
plain white paper. Make sure paper is loaded, and then
press
OK
to start the process.
The device initializes the ink cartridges and aligns the printer.
This takes approximately 5 minutes.
Do not disconnect or turn off the HP All-in-One during
this time. You may hear the device making noises.
b
After the page prints, the printer is aligned. Check the color
graphics display for the status, and then press
OK
.
Recycle or discard the alignment page.
a
b
Match the color and pattern of the ink cartridge to the color and
pattern on the print carriage.
Insert all six ink cartridges
a
b
c
a
Push the black ink cartridge into the first slot on the left. Close
the latch.
b
Repeat with each of the color ink cartridges.
c
Make sure each latch is secure.
If an ink cartridge error message displays, verify that all ink cartridges are inserted and latched. If the error
message continues, the initialization ink cartridges may have been damaged.
Please call 1-800-474-6838 to receive replacement ink cartridges.