HP Photosmart C7200 Basics Guide - Page 9
Network setup, Wired network setup
View all HP Photosmart C7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Network setup This section describes how to connect the HP All-in-One to a network and how to view and manage network settings. If you want to: See this section: Connect to a wired (Ethernet) network. "Wired network setup" on page 7 Connect to a wireless network with a wireless "Integrated wireless WLAN 802.11 network router (infrastructure). setup" on page 9 Connect directly to a wireless-capable computer without a wireless router (ad hoc). "Wireless ad hoc network setup" on page 12 Install the HP All-in-One software for use in a "Install the software for a network connection" networked environment. on page 16 Add connections to more computers on the network. "Connect to additional computers on a network" on page 16 Change the HP All-in-One from a USB connection to a network connection. NOTE: Use the instructions in this section if you first installed the HP All-in-One with a USB connection, and you now want to change to either a wireless or Ethernet network connection. "Change the HP All-in-One from a USB connection to a network connection" on page 17 View or change the network settings. Find troubleshooting information. "Manage your network settings" on page 17 "Network troubleshooting" on page 49 NOTE: You can connect the HP All-in-One to either a wireless or wired network, but not both at the same time. Wired network setup This section describes how to connect the HP All-in-One to a router, switch, or hub using an Ethernet cable and how to install the HP All-in-One software for a network connection. This is known as a wired or Ethernet network. Network setup Network setup 7