HP Presario CQ58-a00 HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC - Ma - Page 75
Power connector cable, To remove the power connector cable
View all HP Presario CQ58-a00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Power connector cable Description Power connector cable Spare part number 689678-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32), and then remove the following components: ● Memory module/wireless module compartment cover (see WLAN module on page 41) ● Hard drive (see Hard drive on page 46) ● Keyboard (see Keyboard on page 51) ● Top cover (see Top cover on page 55) To remove the power connector cable: 1. Position the computer upright with the right side toward you. 2. Disconnect the power connector cable (1) from the system board. 3. Release the power connector cable from the clips (2) built into the base enclosure. Component replacement procedures 67