HP Presario M2000 HP Pavilion ze2000 Notebook PC, Compaq Presario M2000 Notebo - Page 116
by pulling, Remove the wireless communications module
View all HP Presario M2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Removal and Replacement Procedures ✎ Before disconnecting the cables, make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module. 5. Disconnect the wireless antenna cables 1 from the Mini PCI communications module. 6. Spread the two retaining tabs 2 that secure the Mini PCI communications module to the communications compartment socket. (The front edge of the board rises up). 7. Remove the wireless communications module 3 by pulling the board away from the socket at a 45-degree angle. ✎ Mini PCI communications modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket. Removing a Mini PCI Communications Module Reverse the above procedure to install a Mini PCI communications module. 5-18 Maintenance and Service Guide