HP Presario SR5600 Upgrading and Servicing Guide - Page 27
Installing a Memory Module, If you are
View all HP Presario SR5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
5 Push down the two retaining clips on the ends of the memory socket until the memory module pops out of the socket. WARNING: Do not pull the memory module out of the socket. Use the retaining clips to remove the module. 6 Lift the memory module from the memory socket. Installing a Memory Module Upgrade the memory in your PC with memory of the same type and speed as the memory originally installed in your PC. CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module. 1 Open both latches of the memory module socket: If you are replacing a memory module, put the new memory module in the same memory slot from which the old memory was removed. Or If you are adding a memory module, install the new module into the socket nearest the preinstalled module, and install additional modules in the next available sockets. Upgrading and Servicing Guide 23