HP Presario SR5600 Upgrading and Servicing Guide - Page 7
After Closing the PC, Removing the Side Panel, See Before Opening the PC
View all HP Presario SR5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
After Closing the PC To avoid injury and equipment damage, always follow this procedure in this order after closing the PC: 1 Reconnect the power cord. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface card (NIC) (labeled as an Ethernet connector). 2 Reconnect the modem/telephone cable and all other cables (such as the keyboard, mouse, and monitor). 3 Reconnect external devices. 4 Turn on the PC and all peripherals such as the monitor. 5 If you installed an add-in card, install any software drivers supplied by the card manufacturer. Removing the Side Panel 1 See "Before Opening the PC" on page 2. 2 Loosen the thumbscrew (A) that secures the side panel to the PC chassis. You may need to use a screwdriver the first time you loosen the screw. A 3 Use the handle to pull and slide the panel back about 1 inch (2.5 centimeters), and then lift it off the chassis. WARNING: Beware of sharp edges inside the chassis. Upgrading and Servicing Guide 3