HP ProLiant 1200 SMART-2DH Array Controller Reference Guide - Page 107
IBM OS/2, Materials Needed, Creating an SSD Diskette
View all HP ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
6-39 IBM OS/2 The instructions in this section may be used to install the initial driver for a new SMART-2DH Controller installation or to upgrade the driver in an existing OS/2 server/SMART-2DH Controller system. If you use SmartStart to install OS/2 and drivers on a new server you do not need to create the OS/2 SSD diskette and you can skip this section. Materials Needed You will need the following items to manually install the SMART-2DH Controller OS/2 driver on your server: s Compaq SmartStart and Support Software CD (supplied in the SMART2DH Controller Option Kit) s One blank diskette s Access to a server or workstation with a bootable CD-ROM drive. This may be the system in which you are installing the SMART-2DH Controller. Creating an SSD Diskette The OS/2 driver for the SMART-2DH Controller is located on the Compaq SmartStart and Support Software CD that was supplied in the SMART-2DH Array Controller Option Kit. To gain access to the driver you will first need to create the OS/2 SSD diskette. This diskette contains the latest operating system software, drivers, and supporting documentation for all Compaq equipment supported by OS/2. To create this diskette: 1. Boot the server from the Compaq SmartStart and Support Software CD. 2. From the Compaq System Utilities screen, select Create Support Software. 3. From the Diskette Builder screen , select Create Support Software Diskettes from CD only. 4. Scroll down the list and select Compaq OS/2 2.x Support Software. 5. Follow the instructions on the screen to create the OS/2 SSD diskette. SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED