HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 59
Error Code, Beeps, Probable Source of, Problem, Action, Option Cache Memory
![]() |
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3-7 POST Error Messages Continued Error Code Beeps Probable Source of Problem 205-Cache None Cache memory error. Memory Error Option-Cache Option Cache Memory Memory Error Error. 206-Cache Controller Error 207-Invalid Memory Configuration Check SIMM Installation 208-Invalid Memory Speed Check SIMM Installation None None 1L, 1S 211-Cache Switch None Set Incorrectly 212-System Processor Failed/Mapped out 213-Cache size Error (ProSignia VS only) 213-System Processor Not Installed 1S None 1S Cache controller failure. Memory module installed incorrectly. The speed of the memory is too slow, where: xx00 = expansion board SIMMs are too slow, or 00yy = system board SIMMs are too slow. xx and yy have same bit set. Switch not set properly during installation or upgrade. Processor in slot x failed. Invalid optional cache size. System processor configured for slot indicated is missing. 301-Keyboard Error None Keyboard failure. Action Replace the processor board in the slot indicated. Replace the option cache board. Run Diagnostics. Verify placement of memory modules. The speed of the memory modules must be 60 or 70 ns. Verify the speed of the memory modules installed and replace. Verify switch settings. Run Diagnostics and replace failed processor. Replace cache with 256K cache. Install processor in the slot indicated or run the System Configuration Utility to remove the processor from the .CFG file. Turn off the computer, then reconnect the keyboard. Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
![](/manual_guide/products/hewlettpackard-proliant-2500-compaq-proliant-2500-family-servers-maintenance-service-guide-43cbf23/59.png)