HP ProLiant xw2x220c Hardware and Software Supported by HP ProLiant Blade Work - Page 15

3-3 Hardware internal to the HP ProLiant xw2x220c Blade Workstation Table 3-3 lists the hardware options supported by each workstation node in the xw2x220c blade workstation, for each operating system. Note that the two workstation nodes, Workstation A and Workstation B, must be identically configured. Table 3-3 Hardware internal to each blade workstation node (A and B) is listed below Hardware Processors and memory One or two Dual-Core Xeon processors: 1. E5205 - 1.86 GHz, 65W 2. L5240 - 3.00 GHz, 40W 3. X5260 - 3.33 GHz, 80W One or two Quad-Core Xeon processors: 1. L5410 - 2.33 GHz, 50W 2. L5420 - 2.50 GHz, 50W 3. L5430 - 2.66 GHz, 50W 4. E5410 - 2.33 GHz, 50W 5. E5420 - 2.50 GHz, 80W 6. E5430 - 2.66 GHz, 80W 7. E5440 - 2.83 GHz, 80W 8. E5450 - 3.00 GHz, 80W Windows XP 32 64 bit bit Windows Vista 32 64 bit bit Red Hat Enterprise Linux version 4.5 and later, 64 bit version 5.2 and later, 64 bit Comment 3333 3 3333 3 3 For each workstation node, the only supported processor upgrade is adding a second processor that is identical to the first, factory-installed processor. 3 Maximum memory (GB) Disk drives and storage controllers 4 32 4 32 32 SATA disk drives - One 120 GB or one 250 GB drive per workstation node 3 3 3 3 3 Embedded SATA controller 3333 3 Graphics adapter that is factory-installed in the xw2x220c blade workstation NVIDIA Quadro FX 770M graphics adapter 3333 3 32 3 3 Each workstation node has a dedicated FX 770M graphics adapter installed. Therefore, 3 there are two FX 770M graphics adapters in the xw2x220c blade workstation. Hardware supported with the blade workstations 15