HP R1500 HP UPS R7000 User Guide - Page 26
Launching a terminal emulation program, Configuring the UPS Network Module network settings
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2. Connect the RJ-45 connector on the DB-9 to RJ-45 cable to the Settings/AUX connector on the UPS Network Module. This connection is used to access and configure the UPS Network Module network settings locally through a terminal emulation program. Launching a terminal emulation program NOTE: HyperTerminal is the serial communication program provided with Microsoft® Windows® and is used in this section as an example for setting up a terminal emulation session. If you are using another utility, the steps might be different. 1. Be sure that the UPS is powered on. 2. On the host computer, click Start, and select Programs>Accessories>Communications>HyperTerminal. The Connection Description window appears. 3. Enter a description, select an icon for the connection, and then click OK. The Connect To window appears. 4. Select the serial connector on the host computer to which the DB-9 to RJ-45 adapter is attached, and then click OK. The COM Properties window appears. 5. Select the following parameter values, and then click OK. o Bits per second-9600 o Data bits-8 o Parity-None o Stop bits-1 o Flow control-None Configuring the UPS Network Module network settings On the terminal emulation session screen running on the host computer: 1. Press any key. The initialization process completes, and then you are prompted to enter the password. Installation and configuration 26